© Powered by SiteSpirit
Switch to: Heiden Tuning / MikesXS
Select product, add to shopping bag and be sure to fill out the CORRECT address!
Shipping 0-5 kg is €15,00 for inside the EU.
Ask for the shipping price outside the EU!
Minimum order amount is 15 euro! Shipping within Europe free (< 5 kg) on orders 150 euro and up.
Sélectionnez les articles, ajoutez les dans votre panier et remplissez votre adresse CORRECTE!
Les frais de port sont de 15€ pour des marchandise de 0 à 5 kg en Europe.
Pour une expédition hors Europe, demandez nous les frais de port!
Le montant minimum dúne commande est de 15€ !
Les frais de port pour l'Europe sont gratuits pour des colis inférieurs à 5 kg et dont le montant est supérieur à 150€.
#01-9093 - Yamaha Genuine Valve Collets (keepers)
 Yamaha Genuine Valve Collets (keepers) (1pair) for Intake or Exhaust Valve - OEM # 341-12118-00
|
#05-0065 - Polished Stainless steel Intake Valve
 XS Performance Polished Stainless steel Intaket Valve with collets. Fits: All 650's 1970-84 Replaces OEM #341-12111-02
|
#01-9092 - Exhaust Valve & matching collet set
 Exhaust Valve & matching collet set - Fits: All 650's 1970-84 Quality made in Japan - Replaces OEM #341-12121-01
|
#01-9091 - Intake Valve & matching collet set
 Intake Valve & matching collet set - Fits: All 650's 1970-84 Quality made in Japan - Replaces OEM # 341-12111-02
|
#01-0115 - Valve Stem Seals for high lift cams
 Premium Valve Stem Seals. Use these with Our New #05-0025 XS Performance Cam and matching XS Performance Valve Spring Sets. Seals are 0.85mm shorter than stock. Set of 4.
|
#01-0114 - Valve Stem Seals
 Valve Stem Seals - Fits: All 650's 1970-84 Made in Japan - OEM Ref.# 341-12119-00/02 Set of 4
|
#35-0077 - Valve guide Install / remove driver tool
 Valve guide Install / remove driver tool for 1970-84 650's
|
#01-9089 - Valve Guide - Intake - 1st. Oversize
 Intake Valve Guide - 1st. Oversize. Fits All 650's 1970-84 OEM Ref. # 341-11133-11.
|
#01-9088 - Valve Guide - Exhaust
 Valve Guide - Exhaust - Standard size for 1970-84 TX/XS650's
|
#01-9087 - Valve Guide - Intake
 Valve Guide - Intake - Standard size for 1970-84 XS/TX650's
|
#49-0711 - Advance/Breaker Housing Screw & washer Set
 Advance/Breaker Housing Screw & washer Set (6pc.Set) - 3 countersunk flat head type screws and 3 matching starlock washers. 2 sets required to do both engine housings on each engine. Fits: All 650's 1970-84
|
#18-0863 - Gasket - Rear of Advance or Breaker Housing
 Gasket - Rear of Advance or Breaker Housing - Fits: All 650's 1970-84 - 2 used on each engine. OEM Ref.# 256-11146-00
|
#49-0738 - Stud valve cover
 Used to mount the valve cover to the head, each, M6
|
#18-0673 - Tappet cover Gasket 3 hole for '70-'72 models
 Tappet cover Gasket (3 Hole) - Three pieces used on each 1972-84 engine or 4pc. on all 1970-71 engines. Note: Gasket can be used in place of O-Rings used on some later models. OEM Ref.# 256-11196-01
|
#18-0672 - Tappet cover Gasket 4 hole for '70-'72 models
 Tappet cover Gasket (4 Hole) - One piece used on each engine - Fits: All models from 1972-84. Oem Ref.#306-11198-00 - Note: Gasket can be used in place of O-Rings used on some later models.
|
#18-0671 - Tappet cover O-Ring
 Tappet cover O-Ring - Made in Japan by original supplier (Ars). Sold Each Fibre gaskets can be used on all 650's, these O-Rings can be used only on engines with the O-ring groove in the tappet cover cap.
|
#05-0004 - Cam chain tensioner pivot arm Assembly
 Cam chain tensioner pivot arm Assembly. Fits: XS/TX 650's 1974-84 OEM# Ref. 447-12220-00 !! PLEASE CHECK THE NUMBER OF YOUR ROD BEFORE ORDERING A CRANK, RODS OR PISTONS!! !! Veuillez vérifier sur les bielles de votre vilebrequin le chiffre qui est inscrit...
|
Heiden Tuning - Chromiumweg 23 - 3812NL - Amersfoort NL - Phone: 033 2862800 - Fax: 033 2861311 - E-mail: heidentuning@hetnet.nl
