© Powered by SiteSpirit
Switch to: Heiden Tuning / MikesXS
Select product, add to shopping bag and be sure to fill out the CORRECT address!
Shipping 0-5 kg is €15,00 for inside the EU.
Ask for the shipping price outside the EU!
Minimum order amount is 15 euro! Shipping within Europe free (< 5 kg) on orders 150 euro and up.
Sélectionnez les articles, ajoutez les dans votre panier et remplissez votre adresse CORRECTE.
Les frais de port sont de 15€ pour des marchandise de 0 à 5 kg en Europe.
Pour une expédition hors Europe, demandez nous les frais de port!
Le montant minimum dúne commande est de 15€ !
Les frais de port pour l'Europe sont gratuits pour des colis inférieurs à 5 kg et dont le montant est supérieur à 150€.
#20-6503 - Float Hinge Pin
 Float Hinge Pin for stock Mikuni BS38 CV Carbs as used on 1970-79 XS/TX650's
|
#20-6504 - Float Hinge Pin
 Float Hinge Pin for stock Mikuni BS34 CV Carbs as used on 1980-84 XS650's
|
#48-0993 - Float Bowl Screws Early Mikuni CV carb
 Float Bowl Screws - 4mm. - ( Pk./4 Screws with lockwashers). Fits: Early Mikuni CV carb floatbowls.
|
#48-0991 - Float Bowl Screws Late Mikuni CV carb
 Float Bowl Screws - 5mm. - ( Pk./4 Screws with lockwashers). Fits: Late Mikuni CV carb floatbowls.
|
#48-0778 - Float Bowl Drain Screw with O-Ring
 Float Bowl Drain Screw with O-Ring - Fits: 80-84 Stock 34mm. Mikuni CV Carbs.
|
#48-0779 - Float Bowl Drain Plug
 Float Bowl Drain Plug - Fits:1970-79 Stock 38mm. Mikuni CV Carbs.
|
#20-6028 - Carb Slide & Diaphragm Assembly for Mikuni BS34 CV
 Carb Slide & Diaphragm Assembly. - Fits: Mikuni BS34 CV Carbs as used on 1980-84 XS650's OEM Ref.# 3F7/3H5-14940 - Mikuni Genuine
|
#48-0789 - Carb Slide & Diaphragm Assembly for late Mikuni BS38 CV Carbs
 Carb Slide & Diaphragm Assembly - Fits: Mikuni BS38CV Carbs as used on 1978-79 XS650's.
|
#48-0669 - Slide Needle Preload Spring
 Spring - Slide needle preload spring for stock BS34 CV Mikuni carbs as used on 1980-84 North American model XS650's. OEM Ref.# 3F7-14589-00-00 This spring holds the slide needle down in place in the carb slide.
|
#48-0668 - Slide Needle Clip
 Carb Slide Needle Clip (pk./2) - Fits: Slide Needles on 1974-84 650's with stock Mikuni BS34/38 CV Carbs. OEM Ref.# 256-14919-00
|
#48-5040 - Choke Plunger Dust Seal 1980-84 XS650
 Choke Plunger Dust Seal - Fits: 1980-84 XS650 BS34 CV Carb Choke Plunger
|
#48-5041 - Choke Plunger Dust Seal 1970-79 XS650
 Choke Plunger Dust Seal - Fits: 1970-79 XS650 BS38 CV Carb Choke Plunger
|
#48-5021 - Throttle Butterfly Shaft Seal
 Throttle Butterfly Shaft Seal - Fits: Stock Mikuni BS34/BS38 CV Carbs on all 1970-84 650's
|
#48-0992 - Screws - 5mm Late Mikuni CV carb
 Screws - 5mm (no lock washers) Late Mikuni CV carb - Pk./4
|
#48-0991 - Screws - 5mm Early Mikuni BS38 CV carb
 Screws - 5mm.- Early Mikuni BS38 CV carb Lid Screws with lockwashers Pk./4
|
#48-5002 - Rubber pilot jet Passage Plug
 Rubber pilot jet Passage Plug (Pk./2) Fits: XS650G/H/SH/SJ/SK/SL (1980-84) stock Mikuni BS34 CV Carbs. Used inside float bowl to seal pilot jet passage - 1 used per carb
|
#20-5020 - Gasket - Float Bowl 1980-84 XS650
 Gasket - Float Bowl - Fits: 1980-84 XS650 Stock 34mm. Mikuni CV Carbs. Oem Ref.# 3F7-14984-00
|
#20-7029 - Gasket - Float Bowl 1970-79 XS/TX650
 Gasket - Float Bowl - Fits: 1970-79 XS/TX650 Stock 38mm. Mikuni CV Carbs. OEM Ref.# 256-14984-00
|
Heiden Tuning - Chromiumweg 23 - 3812NL - Amersfoort NL - Phone: 033 2862800 - Fax: 033 2861311 - E-mail: heidentuning@hetnet.nl