© Powered by SiteSpirit
Switch to: Heiden Tuning / MikesXS
Select product, add to shopping bag and be sure to fill out the CORRECT address!
Shipping 0-5 kg is €15,00 for inside the EU.
Ask for the shipping price outside the EU!
Minimum order amount is 15 euro! Shipping within Europe free (< 5 kg) on orders 150 euro and up.
Sélectionnez les articles, ajoutez les dans votre panier et remplissez votre adresse CORRECTE.
Les frais de port sont de 15€ pour des marchandise de 0 à 5 kg en Europe.
Pour une expédition hors Europe, demandez nous les frais de port!
Le montant minimum dúne commande est de 15€ !
Les frais de port pour l'Europe sont gratuits pour des colis inférieurs à 5 kg et dont le montant est supérieur à 150€.
#33-0720 - steering lock cap
 Steering lock cap as used on most european models
|
#28-0715 - steering lock assy
 Steering lock assy neimann complete 12 mm diameter as used on most european models
|
#27-1071 - Swingarm Pivot Bolt (Shaft) '70-'73 models
 Swingarm Pivot Bolt (Shaft) - Bolt with full size thread (replaces undercut original). Fits:XS1/XS1b/XS2/TX650 (1970-73). Check your original for cracks at the threads.
|
#27-0297 Swingarm Pivot Nut Locktab
 Swingarm Pivot Nut Locktab. Stainless.
|
#28-1025 - Swingarm Grease Seal Set
 Swingarm Grease Seal Set - Holds grease into bushings & shaft area of swing arm. Helps seal out water & dirt. If your bike has originals they should be re- placed! ( 20+ years). Made in Japan by original supplier. Fits: All 650's 70-84
|
#HT-2127 - shim , swingarm 26-34-0,3
 shim 26-34-0,3 Fits: All 1970-84 650's 1 on each side of the swingarm. oem number:156-22127-00
|
#28-1026 - Swing Arm Bolt Grease Fitting
 Swing arm bolt Grease Fitting - Replace original grease fittings with ones that fit to common American size grease guns. Fittings fit to ends of swing arm shaft (bolt). 2 required per bike. Fits: All 650's 1970-84
|
#27-1068 - Bushing Swing Arm Bolt Tube
 Bushing (swing arm Bolt tube) OEM Ref.# 341-22184-00 - Note: Tube is a slip fit through bronze bushings. Replace if original is galled or will not fit through new bronze bushings. Fits: All 650's 1970-84
|
#28-1024 - Bronze Swingarm Bushings
 Bronze Swingarm Bushings (Set/2) - Replace your plastic factory swing arm bushings!, Improve your bikes handling. A first Must Do for All XS650's Set Fits: All 1970-84 650's
|
#28-2009 - Steering Head Bearing Kit
 Steering Head Bearing Kit - Kit replaces factory loose ball bearings & races. Tapered Roller bearings have 10 times the contact area and less flex. Drop in replacement for factory original type. Japanese made Superior Quality. Fits: 1970-84 XS/TX 650's
|
#HT-3462 - dust seal [under stearing head bearing]
 dust seal under stearing head bearing oem nr:164-23462-00
|
#35-3005 - Ring Wrench
 Ring Wrench to Tighten Steering Head Cogged Nuts Also fits preload adjuster on some stock Yamaha Shocks
|
#49-0750 - Steering Head Locknut
 Steering Head Locknut. Fits: 74-84 XS650's Replaces OEM # 90179-25033
|
#49-0752 - Chrome Steering Head Bolt & Washer
 Steering Head Bolt with domed head and matching chrome radiused Washer. Fits: All 650's with a steering head post Bolt (not models with a damper). Improved appearance over stock style.
|
#HT-0752- Stainless Steel Bolt
 Steering Head Bolt stainless steel. Fits: All 650's with a steering head post Bolt (not models with a damper). Improved appearance over stock style
|
#28-4008 - Hydraulic Steering Damper
 Hydraulic Steering Damper - 7 position adjustable in 20Lb. force increments. Quality Made in Japan. Ideal for sidecar or racing use. Frame bracket must be fabricated to adapt to your application.
|
#28-4001 - Alloy Bracket for 35mm fork tubes
 Alloy Bracket - For Fork tube end of our Hydraulic Steering Damper. Fits: 35mm Fork tubes on Yamaha XS650's (1977-84). Made in Japan
|
#28-4014 - Alloy Bracket for 34mm fork tubes
 Alloy Bracket - For Fork tube end of our Hydraulic Steering Damper. Fits: 34mm. Fork tubes on Yamaha XS/TX650's (1971-76). Made in Japan
|
#28-1020 - Replacement Shaft Needle
 Replacement shaft Needle Bearing for #28-1011 conversion kit
|
Heiden Tuning - Chromiumweg 23 - 3812NL - Amersfoort NL - Phone: 033 2862800 - Fax: 033 2861311 - E-mail: heidentuning@hetnet.nl
