© Powered by SiteSpirit
Switch to: Heiden Tuning / MikesXS
Select product, add to shopping bag and be sure to fill out the CORRECT address!
Shipping 0-5 kg is €15,00 for inside the EU.
Ask for the shipping price outside the EU!
Minimum order amount is 15 euro! Shipping within Europe free (< 5 kg) on orders 150 euro and up.
Sélectionnez les articles, ajoutez les dans votre panier et remplissez votre adresse CORRECTE!
Les frais de port sont de 15€ pour des marchandise de 0 à 5 kg en Europe.
Pour une expédition hors Europe, demandez nous les frais de port!
Le montant minimum dúne commande est de 15€ !
Les frais de port pour l'Europe sont gratuits pour des colis inférieurs à 5 kg et dont le montant est supérieur à 150€.
#24-2774 - Valve Cover Chrome 4-hole [price 1 piece]
 For O-ring use.
|
#24-2773 - Valve Cover Chrome 3-hole [price 1 piece]
 For O-ring use.
|
#05-0080 - Stainless Steel Rocker Shaft Plug
 Stainless Steel Rocker Shaft Plug with O-ring. (Set of 4 pc.) - Allen socket head type. Fits: All XS/TX 650's 1970-84
|
#05-0081 - Aluminum Rocker Shaft Plug
 Aluminum Rocker Shaft Plug with O-ring (Set of 4 pc.) Allen socket head type. Fits: All XS/TX 650's 1970-84
|
#01-9095 - Tappet adjuster Screw + Lock Nut
 Tappet adjuster Screw + Lock Nut - Hex Socket type for easier valve clearence adjustments or to replace originals with damaged or worn hard facing (this causes inacurate clearence settings). 4 used per engine.
|
#05-0025 - Performance Cam/Valve Spring Kit
 High Performance Camshaft and matching performance Valve Spring Kit (Sold as a kit Only). Cam fits 1974-84 447/533 type engines only. Camshaft has removable 36 tooth drive sprocket and kit includes special valve stem seals, Valve Springs and clearance...
|
#05-0029 - Performance Valve Spring Set
 Performance Valve Spring Set (8 pc.) with steel caps (4 pc.) Special Valve caps provide maximum Cap to stem seal clearance. For use with the XS Performance #05-0025 Cam or Web cams or to replace original stock spring & cap sets. Fits: XS/TX650's ...
|
#05-0028 - Shim for valve spring seat
 Shim for valve spring seat - Original part used on cylinder head under the valve spring. Steel shim must be in place on head (often missing! ) 1pc. fits below each valve spring assembly.
|
#05-0007 - Camshaft Bearing
 Camshaft Bearing - B16005 (Special C4 Clearance). 4 used per engine. Fits: All XS/TX650’s 1970-84. Made in Japan by original supplier.
|
#01-9020 - Camshaft Seals
 Camshaft Seals (Pk./2) Special triple lip camshaft Oil Seals. - Made in Japan Fits: All 650's 1970-84
|
#05-0034 - Camshaft internal cam needle Bearing
 Camshaft internal cam needle Bearing - (Upgrade/replacement for #05-0033) Fits: All 650’s 1970-84. Mounts flush with cam ends.
|
#05-0033 - Camshaft internal metal Labrinth Seal (Bushing)
 Camshaft internal metal Labrinth Seal (Bushing) for advance rod. 2 used per camshaft on 1970-79 models (Points ignitions) and also required if using Boyer ignitions. Fits inside of camshaft and flush with ends (one each side). Note: These are usually...
|
#05-0032 - Camshaft internal metal Bush for advance rod
 Camshaft internal metal Bush for advance rod. 2 Used per camshaft on 70-79 models (Points Ignitions) and also required if using Boyer ignitions. Fits inside cam in center (one each side) Note: These are usually missing from 1980-84's.
|
#24-2771 - Camshaft aluminium sidecovers with XS Performance logo
 Polished Chrome Aluminum Cam End Cover Set (2) - with XS Performance Logo. Fits: All 650's 1970-1984. One cover for the advance side, one cover for the points side. CNC Machined - Polished Chrome finish (XS Performance Logo) with chrome allen set screws...
|
#24-2772 - Camshaft aluminium sidecovers no logo(NEW)
 Polished Chrome Aluminum Cam End Cover Set (2) - Plain, No logo. Fits: All 650's 1970-1984. One cover for the advance side, one cover for the points side. CNC Machined - Polished Chrome finish (Plain, No logo) with chrome allen set screws for mounting...
|
#HT-0914 - Camshaft aluminium sidecovers with ribs
 Aluminium camshaft sidecovers. Sold as a set (2 pc.)
|
#HT-0911 - Camshaft aluminium sidecovers
 Aluminium camshaft sidecovers. Sold as a set (2 pc.)
|
#HT-0912 - Camshaft aluminium sidecovers with Yamaha logo
 Aluminium camshaft sidecovers with Yamaha logo. Sold as a set (2 pc.)
|
#35-0112 - Cam chain Breaker/Riveter tool Kit
 Cam chain Breaker/Riveter tool Kit - a must have tool to break and rivet cam chains.
|
Heiden Tuning - Chromiumweg 23 - 3812NL - Amersfoort NL - Phone: 033 2862800 - Fax: 033 2861311 - E-mail: heidentuning@hetnet.nl
