© Powered by SiteSpirit
Switch to: Heiden Tuning / MikesXS
Select product, add to shopping bag and be sure to fill out the CORRECT address!
Shipping 0-5 kg is €15,00 for inside the EU.
Ask for the shipping price outside the EU!
Minimum order amount is 15 euro! Shipping within Europe free (< 5 kg) on orders 150 euro and up.
Sélectionnez les articles, ajoutez les dans votre panier et remplissez votre adresse CORRECTE!
Les frais de port sont de 15€ pour des marchandise de 0 à 5 kg en Europe.
Pour une expédition hors Europe, demandez nous les frais de port!
Le montant minimum dúne commande est de 15€ !
Les frais de port pour l'Europe sont gratuits pour des colis inférieurs à 5 kg et dont le montant est supérieur à 150€.
#35-8031 - Metric Thread Pitch Gauge
 Thread Pitch Gauge for measuring Metric thread pitch (threads per millimeter). A very useful tool to identify the many various fastener threads used on Japanese bikes. Gauge has the following sizes - 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.25, 1.75, 2.7, 2.8...
|
#35-9096 - Image Scope [NEW ! ]
 Professional Flexible Fibber Optic Image Scope for inspecting engine internal parts.18" long wand with a 6mm.(1/4") OD tip. Image resolution is 7,400 pixels. Packed in a blow mold case with handle jacket and extra Xenon Bulbs and 2 AA batteries.
|
#27-5503 - Heavy Duty Tiedown set
 Heavy Duty Tiedown set - 1 inch Wide x 5 1/2FT. 4000 LB. Strength with Quick Release. - Set of 2 (Black Color)
|
#27-5580 - Heavy Duty Tie Down Set
 Long Heavy Duty Tiedown set - 1 inch Wide x 10FT., 4000 Lb. Strength with Quick Release. - Set of 2 (Black Color)
|
#HT-0010 - tappet adjuster tool
 tappet adjuster tool std. adjuster screw
|
#35-1080 - Fork Cap Box Wrench
 32mm. 6 point Box Wrench - chrome plated steel. Also has 39mm. size.
|
#35-5029 - Ring Wrench
 Ring Wrench to tighten Muffler Joint Nut on Early XS1 type muffler
|
#35-3005 - Ring Wrench
 Ring Wrench to Tighten Steering Head Cogged Nuts Also fits preload adjuster on some stock Yamaha Shocks
|
#35-5033 - Shock Ring Wrench
 Ring Wrench to adjust shock preload. Fits: Our 06-3601/07/08/21/27/41 & 47 shock sets and many other aftermarket shocks.
|
#35-5022 - Damper Bolt Driver
 Damper Bolt Driver - Deep type damper bolt driver used to air impact recessed damper bolts from lower fork legs.
|
#35-0008 - Terminal crimper tool
 Terminal crimper tool, fastens metric terminals to wires. Professional Crimps like factory originals. Also can be used to cut and strip wire.
|
#35-0009 - Right Angled Snap ring Plier Set
 Right Angled Snap ring Plier Set - Reaches in deep to remove clips when rebuilding master cylinders.
|
#35-0040 - Alternator Rotor Puller
 Alternator Rotor Puller - Safely pulls rotor without damaging it. Fits: All 650's.
|
#35-0116 - Valve Seat Cutting/Finishing Tool Kit
 Tool Kit for doing 3 angle Valve Seat Cutting & Finishing. Kit was created by Mikes XS specifically for overhauling the XS650 cylinder head. Works on All 1970-84 650 engines. Kit Contains: 1 - Precision ground T-Handle Valve guide Pilot 1- 36 x 45...
|
#35-0059 - Valve Lapping Sticks
 Valve Lapping Sticks
|
#35-0120 - Permatex Valve Lapping Paste
 Permatex Valve Lapping Paste
|
#35-0115 - Valve Spring Compresser Tool
 Valve Spring Compressor Tool in case High quality professional tool to remove valve springs. Now with 5 Tips! - 16, 19, 23, 25 & 30mm. Dia.
|
#35-0077 - Valve guide Install / remove driver tool
 Valve guide Install / remove driver tool for 1970-84 650's
|
#35-0006 - Drive Chain Riveter Tool
 Drive Chain Riveter Tool - Rivets high strength rear drive chain Rivet links with hollow pin ends as on our IZUMI 530HT Chain ( Rivet link #56-0235 ) and many DID brand chains.
|
Heiden Tuning - Chromiumweg 23 - 3812NL - Amersfoort NL - Phone: 033 2862800 - Fax: 033 2861311 - E-mail: heidentuning@hetnet.nl
